New Boat Build Project - (Totally Rebuilding An Older Boat)

Recommended Posts

jamesmusslewhite
Posted
Posted

Well finally after all these years of buying the boat, tearing it completely down and waiting for the time when we had saved the funds and were in the position to actually start the rebuild we are finally nailing on the plywood on the outer-side of the hull. Snif, it is finally starting to look like boat after looking a wooden skeleton or yard-art, I'm so proud I almost have tears. yahoo.gif

 

 

As the plywood has been properly cut to the needed size and shape we start start by applying epoxy to the outside surface of the hull frame. Then the piece of plywood is held into place and tack-nailed into place. Then the center of the rib as well as the location of the middle rail are lined with a straight edge and a pencil and then tick-marks are made on these pencil lines every 2-1/2 inches, This is so it will be easier to nail and maintain the even spacing of the brass nails while standing.

 

12065760_10205694244535239_1720378997158

 

12112082_10205694246015276_6967000322078

 

12107781_10205694249415361_3208712266127

 

12079459_10205694246295283_6087847630602

 

12088024_10205694248615341_7989556933823

  • Like 1
Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

12112224_10205694249655367_5073307973318

 

12088580_10205694250975400_4706297264143

 

12096619_10205694256775545_7596965597131

 

12122775_10205694590463887_3342227525028

 

12112159_10205694590863897_7327328103038

 

10600364_10205694590823896_5816849221446

 

Well that's 16 foot of the old girl properly measured, cut, epoxied and nailed. And so far no mistakes and everything lined-up perfectly.

 

  • Like 2
Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

I had thought about using PVC pipe instead of bamboo for the wings as the PVC would seem to hold up better under the constant contact with the water, but would still use bamboo for the outriggers which secure the wings. It seems like thick walled (high water presser) 4'' or 6'' PVC pipe would work well for the wings of a pumpboat this size. I have even looked around here but have only seen thin walled PVC pipe would work quite well for this task. I admit I have never seen it done before in the Philippines, but that is not to say that it would not work quite well and nobody has just thought to use PVC pipes instrad of bamboo. It is all a matter of water displacement after all. A 55gal plastic drum displaces 470.3 lbs meaning it will hold 470.3 ponds of dead weight above the waterline.

 

When figuring water displacement the follow formula would apply to a 55gal plastic drum;

A cubic foot of water weighs 64.42796 pounds. A 55 gallon drum would displace about 7.3 cubic feet. 7.3 times 64.42796 = 470.3 lbs

(does not include the buoyancy of plastics used in drum construction). One only needs to take the I.D. measurements of a hollow object to determine Cubit foot of hollow space and multiply by 64.42796 (if container in non-buoyant, then deduct the total weight of the container). This will come in handy if your wanting to design any floating projects such as decks and platforms and want to know how many and what size containers will be need to keep the construction above the water line. Remember to also equate all objects expected to be added to the weight of the construction such as people, supplies or other objects, then add additional container sufficient to handle the additional weight. This also applies when calculating the safe number of people in a boat.

 

........................ Pounds               Grams           Kilograms

Cubic cm.       0.002205                1                  0.001

Cubic inch      0.036127         16.387064          0.0163871

Liter                2.204684         1000.028           1.000028

Gallon             8.345404         3785.4118         3.7854118

Cubic foot       62.42796         28316.847         28.316847

  • Like 1
Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

I always loved the look of the Hawaiian outriggers and wings. Talking about being able to pimp-out your ride... biggrin_01.gif  

 

800px-Outrigger_on_Hawaiian_sailing_cano

  • Like 1
Link to comment
Share on other sites

Jake
Posted
Posted

Roger that Gunny about displacement.  It still amazes me how a Missouri class battleship can stay afloat.  Regarding that tricked out Hawaiian outrigger, it looks like fiberglass-epoxy like the skin of a surfboard.  Can that be applied to your boat?  Well, at least re-enforce the bottom hull and all the stress points on the outrigging and wings?  

  • Like 1
Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

Roger that Gunny about displacement.  It still amazes me how a Missouri class battleship can stay afloat.  Regarding that tricked out Hawaiian outrigger, it looks like fiberglass-epoxy like the skin of a surfboard.  Can that be applied to your boat?  Well, at least re-enforce the bottom hull and all the stress points on the outrigging and wings?  

 

Well not to this one as I already have the materials for the outriggers. But, I just might try to start another build on a 36 footer and a modified version of these ourriggers sure would look really good on that one. It would be a head turner...

:thumbs-up-smile:

  • Like 1
Link to comment
Share on other sites

Jake
Posted
Posted

 

Roger that Gunny about displacement.  It still amazes me how a Missouri class battleship can stay afloat.  Regarding that tricked out Hawaiian outrigger, it looks like fiberglass-epoxy like the skin of a surfboard.  Can that be applied to your boat?  Well, at least re-enforce the bottom hull and all the stress points on the outrigging and wings?  

 

Well not to this one as I already have the materials for the outriggers. But, I just might try to start another build on a 36 footer and a modified version of these ourriggers sure would look really good on that one. It would be a head turner...

:thumbs-up-smile:

 

Perhaps like this one?  I'll come over with some beer and good times -- we'll probably get lost at sea......he, he.

 

post-686-0-94877500-1444834991_thumb.jpg

  • Like 2
Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

Well she is officially a boat as the plywood skin is being cut and nailed in place and though the boat at this stage of construction is not yet painted, she can no longer be classified as merely being 'Yard Art'.

 

12143215_10205703639010095_6322202557896

 

12096415_10205703639130098_8631641153587

 

12122926_10205703640890142_6338127858219

 

10277492_10205703641730163_5376183340697

 

12096415_10205703642650186_7578016435161

  • Like 1
Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

12079483_10205703641850166_3714627502188

 

12119169_10205703642810190_6667351364794

 

12115700_10205703649410355_4206709944508

 

12105711_10205703650930393_3903037231506

 

Applying epoxy to the outside surfaces before the piece of plywood is put into place and nailed.

 

12119020_10205703651970419_2983308617063

Link to comment
Share on other sites

jamesmusslewhite
Posted
Posted

The epoxy is smeared thickly on all outside surfaces of the hull frame as each piece of plywood has been carefully measured, cut and held in place to insure a perfect fit. Then the pieces of plywood are nailed with brass nails.

10277492_10205703663130698_5431306508075

 

12074752_10205703664850741_4129630225249

 

12118897_10205703664490732_3327814280080

 

12112130_10205703665370754_5533681320303

 

12096616_10205703666130773_3132787101163

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...